? epcos ag 2009. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components saw rx filter mediaflo series/type: ordering code: b9454 date: version: august 27, 2009 2.2 B39721B9454M410
2 august 27, 2009 b9454 722.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx filter data sheet features n package size 1.4 x 1.1 x 0.4 mm 3 n package code qcs5i n rohs compatible n approx. weight 0.003g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) 0,325 bottom view 0,4 side view top view 0,575 1 5 4 3 2 0,25 1,1 1,4 0,5 0,5 application n low-loss rf filter for mediaflo tv application in moblie telephone systems n high selectivity n usable passband for ch55 + ch56 n impedance 50 w at input and 100 w balanced output pin configuration n 1 input unbalanced n 3,4 output balanced n 2,5 to be grounded
3 august 27, 2009 b9454 722.0 mhz saw components saw rx filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = -10 ?c to +60 ?c terminating source impedance: z s =50 w terminating load impedance: z l = 100 w min. typ. @25?c max. center frequency f c 722.0 mhz maximum insertion attenuation 716.29...727.71 mhz a max 1.4 2.0 db int 1) ctq input vswr 716.29...727.71 mhz 1.7 2.2 output vswr 716.29...727.71 mhz 1.7 2.2 output amplitude balance (|s 31 /s 21 |) 716.29...727.71 mhz C1.2 -0.2/0.7 1.2 db output phase balance ( f (s 31 ) -f (s 21 )+180?) 716.29...727.71 mhz C12 -5/+6 12 ? group delay ripple (p-p) 716.29...727.71 mhz 25 80 ns attenuation a abs 0.1 ... 650.0 mhz 40 45 db 650.0 ... 698.0 mhz 22 27 db ch53: 707.0 mhz 16 25 db int ch54: 713.0 mhz 2.5 3.5 db int ch57: 731.0 mhz 1 2 db int ch58: 737.0 mhz 6 16 db int 776.0 ... 798.0 mhz 32 42 db 824.0 ... 960.0 mhz 35 43 db 1575.0 mhz 35 45 db 1710.0 ... 1785.0 mhz 40 45 db 1920.0 ... 1980.0 mhz 40 45 db 2400.0 ... 2484.0 mhz 30 45 db
4 august 27, 2009 b9454 722.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx filter data sheet 1) db int is integrated rejection (see formula below) db int = 20*log where loss(f n )= n = number of frequency, insertion loss pairs in a channel loss f n1 C () loss f n () + 2 ------------------------------------------------------------ f n f n1 C C () 2 n ? f n f 1 C -------------------------------------------------------------------------------------------------------- 10 s 21 indb () 20
5 august 27, 2009 b9454 722.0 mhz saw components saw rx filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = -30 ?c to +85 ?c terminating source impedance: z s =50 w terminating load impedance: z l = 100 w min. typ. @25?c max. center frequency f c 722.0 mhz maximum insertion attenuation 716.29...727.71 mhz a max 1.4 2.5 db int 1) ctq input vswr 716.29...727.71 mhz 1.7 3.0 output vswr 716.29...727.71 mhz 1.7 3.0 output amplitude balance (|s 31 /s 21 |) 716.29...727.71 mhz C2.0 -0.2/0.7 2.0 db output phase balance ( f (s 31 ) -f (s 21 )+180?) 716.29...727.71 mhz C15 -5/+6 15 ? group delay ripple (p-p) 716.29...727.71 mhz 25 100 ns attenuation a abs 0.1 ... 650.0 mhz 40 45 db 650.0 ... 698.0 mhz 22 27 db ch53: 707.0 mhz 16 25 db int ch54: 713.0 mhz 2 3.5 db int ch57: 731.0 mhz 1 2 db int ch58: 737.0 mhz 5 16 db int 776.0 ... 798.0 mhz 32 42 db 824.0 ... 960.0 mhz 35 43 db 1575.0 mhz 35 45 db 1710.0 ... 1785.0 mhz 40 45 db 1920.0 ... 1980.0 mhz 40 45 db 2400.0 ... 2484.0 mhz 30 45 db
6 august 27, 2009 b9454 722.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx filter data sheet maximum ratings 1) db int is integrated rejection (see formula below) db int = 20*log where loss(f n )= n = number of frequency, insertion loss pairs in a channel operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 3 v esd voltage v esd 100 1) 1) acc. to jesd22-a115a (machine model), 1 negative & 1 positive pulse. v machine model, 1 pulse input power at 400.0...500.0 mhz p in 15 dbm 824.0...2400.0 mhz cw loss f n1 C () loss f n () + 2 ------------------------------------------------------------ f n f n1 C C () 2 n ? f n f 1 C -------------------------------------------------------------------------------------------------------- 10 s 21 indb () 20
7 august 27, 2009 b9454 722.0 mhz saw components saw rx filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function transfer function (wideband)
8 august 27, 2009 b9454 722.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx filter data sheet smith charts s 22 function s 11 function
9 august 27, 2009 b9454 722.0 mhz saw components saw rx filter data sheet please read cautions and warnings and important notes at the end of this document. references type b9454 ordering code B39721B9454M410 marking and package c61157-a8-a3 packaging f61074-v8237-z000 date codes l_1126 s-parameters b9454_nb.s3p b9454_wb.s3p see file header for port/pin assignment table soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2009. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
10 august 27, 2009 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, dssp, miniblue, minicell, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
